Milling Feed Rate Calculator
Translate entered spindle speed, effective teeth and chip load into table feed.
Your result
EVERYDAYEnter your values and select calculate.
On this page How it works & practical examples
How to use the Milling Feed Rate Calculator
Supply parameters appropriate to your tool, material and operation. Effective cutting teeth and diameter may differ from nominal cutter geometry.
The calculation
Worked example
3,000 rpm, four effective teeth and 0.05 mm/tooth give 600 mm/min table feed and about 94.2478 m/min at 10 mm diameter.
Assumptions and limits
Converts your entered settings only; it does not recommend a safe chip load, machine speed or cutting condition. Tool engagement, rigidity and machine limits must be assessed separately.
Common questions
Which inputs should I use?
Supply parameters appropriate to your tool, material and operation. Effective cutting teeth and diameter may differ from nominal cutter geometry.
What does the result exclude?
Converts your entered settings only; it does not recommend a safe chip load, machine speed or cutting condition. Tool engagement, rigidity and machine limits must be assessed separately.